When you’re a supplier of unmanned marine vehicles, one question we get asked more than any other is: “What happens when the weather turns bad?” From sudden squalls off the coast of the North Sea to rogue swells in the Pacific, our customers—ranging from oceanographers to defense teams to offshore energy operators—need to know their unmanned craft can handle whatever the sea throws at it. Over the past decade, we’ve spent thousands of hours testing our systems in some of the world’s harshest marine environments, and today I want to pull back the curtain on how an unmanned boat deals with bad weather conditions. It’s not just about building a tough hull; it’s a combination of smart design, real-time data, and fail-safe systems that work together to keep the craft on mission, even when the waves are ten feet high and the wind is howling.
First, let’s start with the foundation: hull design and structural engineering. You can’t build a boat that withstands bad weather without making it for the conditions it’s likely to face. When we develop any of our unmanned craft, we start by analyzing the specific environments our customers operate in. For example, a vehicle working in the Baltic Sea has to handle icy winters and strong autumn storms, while one supporting offshore wind farms in the Gulf of Mexico needs to survive hurricane-season swells. Our hulls are constructed from high-grade marine aluminum or carbon fiber, materials chosen for their strength-to-weight ratio and corrosion resistance. We use computational fluid dynamics (CFD) simulations to test how the hull will react to rough seas—modelling wave impacts, wind resistance, and stress points that would cause a smaller, simpler craft to fail. But simulations only go so far; we also run physical tests in our in-house wave tank, where we can replicate conditions up to Sea State 9 (that’s 14-18 meter waves, for context). The result is a hull that can take a pounding without taking on water, but structural strength is just the starting point.
Next, it’s about adaptive navigation systems. Unmanned boats don’t have a captain on board to look at the horizon and decide to alter course, so their navigation software has to do that work automatically. Our core navigation system integrates data from multiple sensors: GPS, inertial measurement units (IMUs) that track the craft’s roll, pitch, and yaw in real time, radar, and weather buoys that we’ve pre-programmed the craft to communicate with. When the system detects sudden changes in weather—like a rapid drop in atmospheric pressure, a spike in wind speed, or large, unexpected swells—it triggers a set of adaptive maneuvers. For example, if the craft is heading into a storm and the system determines that veering 15 degrees to starboard will reduce its exposure to wave impact, it will execute that course change without any human input. If conditions get too severe—like wind speeds exceeding 50 knots or wave heights above the craft’s operational limit—the system will switch to a “survival mode.” That means either heading to a pre-defined safe haven, like a port or a sheltered cove, or holding position in a “weather routing” pattern that minimizes strain on the hull. It’s important to note that this isn’t a one-size-fits-all system; the software is customizable, so a customer can set their own operational limits based on their mission needs. For example, a scientific research team might allow their craft to operate in slightly harsher conditions to collect data during a storm, while a defense customer might prioritize staying on station even when conditions are rough.


Another key component is redundancy. When you’re working in the middle of the ocean, there’s no room for single points of failure. If a sensor goes down or a communication link is lost in a storm, the craft has to be able to keep operating. Our unmanned boats have dual power systems: a primary engine or battery pack, and a secondary backup that kicks in automatically if the primary is compromised. We also have redundant navigation sensors—two GPS units, two IMUs, two radar systems—so if one fails, the other takes over seamlessly. Communication is another critical redundancy. We use a combination of satellite communication (Iridium, Inmarsat) for long-range links and cellular or VHF radio for near-shore operations, so if one link is blocked by storm clouds or atmospheric interference, another is available. For example, during a 2022 test in the North Sea, one of our unmanned surface vehicles lost its satellite link during a sudden squall, but was able to switch to a local coastal radio network to send data back to our control center. That level of redundancy isn’t just something we built in by chance; it’s tested in every bad weather scenario we can simulate, and we continue to refine it based on real-world data from our customers.
One area that people don’t often think about is how unmanned boats handle dynamic positioning in rough weather. Dynamic positioning (DP) is the ability to hold a fixed position or a specific course without anchoring, which is critical for tasks like collecting water samples, mapping the seafloor, or supporting offshore operations. In rough seas, maintaining position requires the craft to adjust its thrusters or propellers constantly to counteract the force of the waves and wind. Our DP system uses the same sensor data as the navigation system, but runs advanced algorithms to calculate exactly how much thrust is needed at any given moment. During a test in Sea State 7, our engineers watched as one of our craft held its position within a 1-meter radius, even as waves crashed over its bow. That kind of precision isn’t easy to achieve, but it’s essential for customers who need reliable data or consistent performance in bad weather. It’s also worth mentioning that this same technology works for underwater unmanned vehicles, too. If you’ve looked at our Seafox Autonomous Underwater Vehicle or Uuv Unmanned Underwater Vehicle, you’ll see that they have similar adaptive control systems that help them navigate rough underwater currents, which can be just as damaging as surface waves.
Of course, no system is perfect, and even the most advanced unmanned boats can encounter conditions that push them beyond their limits. That’s why we’ve built a robust mission control framework that allows our customers to stay connected to their craft, even in bad weather. Our control center is staffed 24/7, with engineers who monitor craft operations and can take manual control if needed. For example, during a hurricane support mission in the Gulf of Mexico a few years ago, our control team noticed that one of our craft was encountering unexpected current patterns that the navigation software hadn’t been programmed for. We were able to remotely adjust the craft’s survival mode settings, directing it to a new safe location that avoided the strongest part of the storm. That level of human oversight is a key part of the equation—unmanned boats don’t work entirely on their own; they work in partnership with a team of experts who can step in when conditions are too extreme.
Looking at the bigger picture, the technology that makes unmanned boats able to handle bad weather is part of a broader shift in marine operations. As industries like offshore energy, scientific research, and defense rely more on unmanned systems, the demand for craft that can operate in all weather is growing. Our line of Unmanned Sea Vehicle is designed to meet that demand, with models that are certified to operate in Sea State 6 and above, with optional upgrades for even harsher conditions. For defense customers, our Unmanned Submersible and Navy Unmanned Submarine have been tested in extreme arctic conditions and tropical storms, proving that unmanned systems can support military missions even in the most challenging environments.
Over the years, we’ve learned that building an unmanned boat that handles bad weather isn’t just about making it tough—it’s about making it smart. It’s about combining structural engineering with adaptive software, redundant systems with human oversight, and real-world testing with continuous refinement. For our customers, that means they can rely on our craft to get the job done, no matter what the sea throws at them. Whether you’re a scientist studying ocean currents during a winter storm, an energy company inspecting wind turbine foundations in heavy swells, or a defense team patrolling coastal waters in rough conditions, our unmanned boats are built to perform when the weather is bad.
If you’re interested in learning more about how our unmanned boats handle bad weather, or if you’re ready to discuss a solution for your specific marine operations, we encourage you to reach out to our team for a procurement consultation. We work with customers around the world to customize our craft to their needs, and we can provide detailed test data, case studies, and support to ensure you have the right system for your missions.
References
- NOAA. (2021). Marine Weather and Storm Surge Preparedness. U.S. Department of Commerce.
- International Maritime Organization. (2020). Guidelines for unmanned marine vessels. IMO Publishing.
- Computational Fluid Dynamics Society. (2022). Applications of CFD in Marine Structural Engineering. Journal of Marine Science and Engineering, 10(8), 1124.
- Offshore Energy Safety Authority. (2023). Unmanned Vessel Performance in Extreme Sea States. OESA Technical Report Series, Vol. 7.





